- 压力准确度： ±0.05%满量程
- 正压温度补偿： 0-50℃
- 测量0-24mA准确度： ±0.015%读数±2uA
- 压力单位： pa, psi, bar, kg/cm2, cmH2O等
17种压力单位自动转换 - 介质： 非腐蚀性气体和液体
- 压力接口： 1/8inNPT内螺纹
- 过压： 最大50%FS ， 20%以上屏幕显示OL报警
- 电池： 1个9V电池最小20小时以上
- 表头尺寸： 200X82X54mm
- 表头重量： 470g
 |
 |
 | JOFRA CPC 系统 A This 'ready-to-use' calibration system comes with an AMETEK pneumatic pump series T-700. The type of pump depends on the operating ranges required. Systems are available for vacuum to 0.7, 2 or 15 bar / 10, 30, or 200 psi. All systems have built-in fine adjustment, vent valve, and separate output for the test object and are delivered with a traceable calibration certificate. | |
| | |
|
|
 | JOFRA CPC 系统 B This 'ready-to-use' calibration system comes with an AMETEK pneumatic pump series T-910. This type of pump has both vacuum and pressure capabilities. System B cover the pressure range vacuum to 15 bar / 200 psi. The system has built-in fine adjustment, vent valve, and separate output for the test object and are delivered with a traceable calibration certificate. |
